implants

Screws

Locking and standard cortical screws are available from 1.5 to 3.5 mm in diameter, to
use according to their function and preferred surgical technique.

Self-tapping screw with cross head
This is used for small diameter screws to take advantage of the low profile of the head.

Self-tapping screw with hexagonal
head. This is used in bigger cortical screws.

Self-tapping screw with hexagonal head.
This is used in bigger cortical screws. Diameter 2.4 – 2.7 – 3.5 mm

Locking screw to be used with locking plates. This option is preferable when a stronger stabilization of the tibial crest is needed.

A locking screw locked into the plate. The screw head does not protrude from the plate surface.


© X-Porous TTA created by Ad Maiora srl

Via della Costituzione 10, 42025, Cavriago – Italy

info@ad-maiora.eu

support@ad-maiora.eu

+39 348 868 3311